What the evidence does not yet show about small manufacturers going digital
Our packet holds no OECD survey and no barrier ranking. Here is what the European and US sources do establish, and how a plant can rank its own barriers.
The strongest number in our sources about small manufacturers and digital tools is a budget share, not a barrier. According to the European Commission's DESI reports, Member States allocated an average 26% of their recovery plan money to digital transformation, against a compulsory threshold of 20%. The same reports name SME digital transformation as a persistent gap, but they do not rank what holds small firms back. This brief was meant to rank those barriers using OECD survey evidence. The packet contains no OECD source at all, so this article cannot give you that ranking. It can show what the available evidence does and does not establish, and how to build a ranking for your own plant from your own records.
- Average share of recovery plan allocations for digital transformation (European Commission
- 26%
- Compulsory threshold for the digital share of recovery plan allocations (European Commissi
- 20%
- Trusted manufacturing advisors in the Manufacturing Extension Partnership network (NIST)
- nearly 1,400
What the data shows
The brief set out to rest on OECD studies of SME digitalisation and their survey data. We searched the packet for that material and found none. There is no OECD survey on small manufacturers, no barrier ranking, and no table of the reasons firms give for stopping. Any ranking we printed would therefore be our own guess presented as evidence, and readers who run plants would be right to distrust it. What follows is what the four sources we verified actually say, and a method you can apply this week.
European sources
The European Commission's DESI reports have tracked EU Member States' digital progress since 2014. As of 2023 they sit inside the State of the Digital Decade report, which monitors targets under the Digital Decade Policy Programme 2030. The 2022 edition, based mainly on 2021 data, names the digital transformation of SMEs as a persistent gap, alongside digital skills and the roll-out of advanced 5G networks. It gives no ranking of those gaps and does not say which one holds a small plant back most.
Money is where DESI gives hard numbers. The Commission says EUR 127 billion is dedicated to digital reforms and investments in national Recovery and Resilience Plans. Member States allocated an average 26% of their allocations to digital transformation, above the compulsory 20%. According to the same reports, Austria, Germany, Luxembourg, Ireland and Lithuania put more than 30% of their recovery money into digital. Those are spending decisions. They show where governments intend to act, not which obstacles a machine shop in a mid-sized town actually faces.
Eurostat's digital economy statistics cover how businesses take up and use ICT, including e-commerce, cloud, data analytics and artificial intelligence. They also measure the level of digitalisation of businesses through a digital intensity index. Those figures show how far adoption has got. The Eurostat excerpt in our packet lists no barrier data and no breakdown by firm size, so it cannot tell a leader why a small firm has stalled. ICT-in-business statistics sit within European business statistics, which is where a researcher would look for firm-size cuts.
American sources
The US Annual Business Survey is a joint project of NCSES, within the National Science Foundation, and the U.S. Census Bureau. According to the Bureau, it measures business owner demographics, research and development, and innovation among US businesses. The Bureau also says the BERD survey is being combined with the ABS to raise data quality and cut respondent burden. The Census Bureau page we reviewed names no digital-adoption barrier questions, so the survey cannot yet supply the ranking this brief wanted.
The Manufacturing Extension Partnership is run by the National Institute of Standards and Technology within the U.S. Department of Commerce, and its stated mission is to strengthen small and medium-sized US manufacturers. NIST says the network has nearly 1,400 trusted manufacturing advisors and more than 450 service locations across the United States and Puerto Rico. Its services include cybersecurity and value stream mapping, with consulting and training tailored to each manufacturer's challenges. NIST describes the network as a public-private partnership and says any manufacturer can use MEP Center services.
NIST also describes a pilot with a $40M budget, focused on additive manufacturing and critical minerals. It dates a Manufacturing Community Day to 24 June 2026. NIST says the pilot funding opportunity is expected later in 2026, and that submissions will be limited to current MEP Centers or a consortium of Centers. The agency also says pilot success requires collaboration across industry, educational institutions, federal labs and government partners. If the funding notice has now been published, read the NIST page for its eligibility text rather than relying on this summary.
Figures in the packet
Each figure as stated by the publisher named in its line. None of them is a ranking of barriers, and the packet does not date every figure to a specific edition.
- Dedicated to digital reforms and investments in national Recovery and Resilience Plans (Eu
- EUR 127 billion
- Average share of recovery plan allocations for digital transformation (European Commission
- 26%
- Compulsory threshold for the digital share of recovery plan allocations (European Commissi
- 20%
- Trusted manufacturing advisors in the Manufacturing Extension Partnership network (NIST)
- nearly 1,400
Source: European Commission; nist.gov
What it means for a leader
Build your own ranking from your own records, because no source here will do it for you. Pull the last three digital or AI projects in your plant that stalled, slowed or were dropped. For each, write the reason in the words of the person who stopped it, not the vendor's. Sort those reasons into groups such as skills, data quality, fit with existing machines, cost and payback, cybersecurity and management time. Whichever group recurs most is your first candidate barrier. This is our judgement as a method, not a sourced finding, and three cases make a small sample.
Treat the European and American gaps as hypotheses to test, not as results. DESI names digital skills and SME digital transformation as gaps, so both are reasonable items to check first. NIST lists cybersecurity among its service areas, which suggests the network treats it as a common need, though the packet gives no measure of how many plants need it. Check each hypothesis against your three cases before you spend money on any of them.
Once the barriers are ranked, sort them by how long each fix takes. A skills gap can often be narrowed with training. A data gap requires a decision about who owns the records and where they live. An integration gap may need a new controller or a supplier's help, which takes longer and costs more. The order matters because a plant that starts with its hardest barrier often stops there. This sequence is our judgement, and none of the sources here tests it.
Do not read national spending as a measure of your readiness. A government can put a large share of its recovery money into digital and still leave a machine shop without a usable data connection between two machines. Use the spending figures to judge whether support may be available, then check eligibility with the funding body. Whether a grant, pilot or loan suits your company is a question for that body and for your own adviser.
Limits of the data
The limits are substantial. The DESI material we hold is the 2022 edition, based mainly on 2021 data, and it gives no barrier ranking. The Eurostat excerpt lists no barrier data and no breakdown by firm size. The Census Bureau page names no digital-adoption barrier questions in the Annual Business Survey. NIST describes what its advisors offer; it does not report what manufacturers say stops them. The European and American sources also cover different economies, so their figures should not be merged into one league table. Until a survey of small manufacturers that asks about barriers and breaks results down by firm size is in hand, the honest answer to this brief's question is that the evidence is not yet there.
